A Numerical Method for Coupling Parameterized Physics-Informed Neural Networks and FDM for Advanced Thermal-Hydraulic System Simulation

arXiv:2604.02663v1 Announce Type: new Abstract: Severe accident analysis using system-level codes such as MELCOR is indispensable for nuclear safety assessment, yet the computational cost of repeated simulations poses a significant bottleneck for parametric studies and uncertainty quantification. Existing surrogate models accelerate these analyses but depend on large volumes of simulation data, while physics-informed neural networks (PINNs) enable data-free training but must be retrained for every change in problem parameters. This study addresses both limitations by developing the Parameterized PINNs coupled with FDM (P2F) method, a node-assigned hybrid framework for MELCOR's Control Volume Hydrodynamics/Flow Path (CVH/FP) module. In the P2F method, a parameterized Node-Assigned PINN (NA-PINN) accepts the water-level difference, initial velocity, and time as inputs, learning a solution manifold so that a single trained network serves as a data-free surrogate for the momentum conservation equation across all flow paths without retraining. This PINN is coupled with a finite difference method (FDM) solver that advances the mass conservation equation at each time step, ensuring exact discrete mass conservation while replacing the iterative nonlinear momentum solve with a single forward pass. Verification on a six-tank gravity-driven draining scenario yields a water level mean absolute error of $7.85 \times 10^{-5}$ m and a velocity mean absolute error of $3.21 \times 10^{-3}$ m/s under the nominal condition with $\Delta t = 1.0$ s. The framework maintains consistent accuracy across time steps ranging from 0.2 to 1.0 s and generalizes to five distinct initial conditions, all without retraining or simulation data. This work introduces a numerical coupling methodology for integrating parameterized PINNs with FDM within a nuclear thermal-hydraulic system code framework.